This high-performance seal is designed to stop smoke from passing under a fire door as well as providing an effective barrier against fire, the outside climate, noise, light and insects.
A drop down seal is activated once the door is closed. This means the door threshold remains clear without the need for a high fixed threshold. It’s the ideal seal to meet document part E and part M of UK building regulations where disability, access and energy conservation is concerned.
The Applique features a satin anodised aluminium finish with galvanised steel flat springs and reinforced actuators and is endurance-tested to 200,000 cycles with a 14mm maximum drop.
The seals are acoustically tested in accordance with BS EN ISO 140-3:1995 and achieved a rating of up to 29dB Rw, fire tested to BS476: Part 20/22: 1987 to 60 minutes and smoke tested to BS EN 1634-3:2004.
This easy-to-fit seal is a versatile solution that comes with pre-fitted screws for a quick and cost-effective installation and can be shortened or cut down if required by 150mm.
Features
- Seal activated by the closing action of the door
- Self-extinguishing 4-fin high quality 'V' zero class PVC rubber seal
- Suitable for timber doors between 780mm and 930mm
- Can be shortened/cut down by 150mm
- 14mm maximum drop
- Fixing screws are supplied
Testing
- Fire tested to BS476 Part 20/22: 1987 to 60 minutes
- Fire tested to BS EN 1634-1:2014
- Smoke tested to BS EN 1634-3: 2004
- Acoustically tested achieving up to 29dB Rw
- Certifire approved - CF5995
Step 3 does include (on page1) two 5mm measurements, (page 2 – 6mm)
The first measurement is in relation to the 5/6 mm gap is the standard we recommend (and the usual gap for acoustic testing), whereas the 14mm measurement in Step 5 confirms that the Applique can drop up to 14 mm.
The second 5mm measurement is in reference to the end caps size (width).
When holding the drop down seals they will only drop on the one side, when fitted in place the side dropping will hit the floor and the mechanism will cause the other side to drop and level out closing the seal.
The 5mm in step 3 on the fitting instructions for the Applique 37 is referring to the width of the End Caps which are 5mm in thickness, and the 14mm reference in Step 4 is referring to the maximum drop coverage that this seal can accomodate.
The Applique 37 range of dropseals are surface mounted and can be retro fitted without the door having to be removed.
The drop seals will accomodate a slope in the floor with a 2mm-4mm tolerance from one side to the other.
These can be fitted either way and fitting instructions can be located on the product page in the Download Tab.
The drop seals must be attached as per the fitting instructions (located in the Download Tab) and the bottom of the drop seal will be in line with the bottom of the door to meet the test evidence data.
Please log in to send us a question regarding this product.
