FR230 is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing load bearing capabilities (refer to application instructions).
The system also provides thermal, acoustic and air sealing performance.
It provides a safe working platform for loads up to 2.5 kN/m² when installed in full accordance with recommendations
Features
- Up to 4 hours fire resistance
- 1.21 m² without framework requirement
- Load and impact capability after 50 hours only
- Flows easily around and behind services
- Rapid setting, zero shrinkage formulation
- Can be used as pourable or trowel grade
- Acoustic and thermal performance
- Can be coated with any masonry paint
- Traceability identifier
Application
- Walls
- Floors
- Services, including static joint seals, floor seals, wall seals and load capable seals
- Fire and smoke sealing around cables, steel pipes, copper pipes, cable trays, combustible pipes, dampers and ducting
Testing
- Tested to EN 1366-3 & 4
- Fire tested to BS476 - Part 22
- UL-EU Certification
- UK/CE marked
*Please read the safety datasheet before use.
Q
Can this be used on ceiling as well
A
FR230 Intucompound is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing a load bearing capability in floor seals, no detail for ceiling application.
Please log in to send us a question regarding this product.