FSi Fire Batt Installation Kit

FSi Stopseal® Fire Batt is designed to prevent the passage of fire and smoke between compartment walls and floors built from masonry, composite partition or plasterboard whilst still allowing the installation of services. The product is tested to EN 1366-3 and BS476 pt 20/22 giving a fire resistance and smoke barrier for up to 240 minutes.

The Fire Batt is tested with a variety of services including multi composite pipes, metallic pipes, plastic pipes, all with or without insulation, cable trays and cables, as well as smoke extract and fire resistant ducts.

The Stopseal® Fire Batt has a 1200mm x 600mm x 50mm >140kg/m³ stone fibre core coated with PS® Coating on both sides. At normal temperatures, the Fire Batt remains flexible to permit thermal and mechanical movement of the services. Both products are unaffected by oil, fungus, moisture and contain no halogens or asbestos.

COAT BACK OF SERVICES IS NOT REQUIRED

The advantages of the Stopseal® Fire Batt and Coating are as follows:

• Fire Resistant testing to EN 1366-3 EI 60 E 90, BS 476 – 240 mins
• Fire Classification to EN 13501-2
• IET (IEE) 17th Edition FireStop Compliant to Regulation 527.1-3 – Electrical Installations
• BS 7671-2008 Chapter 42 & 52 – Electrical Installations Fire Resistance
• Fire resistance tested in flexible walls, rigid walls & floors, composite panel, CLT wall and Durasteel wall
• ir Permeability testing to EN 1026 to 600Pa
• Acoustic Isolation testing to EN 10140 up to 60dB
• Suitable for indoor use without additional environmental protection
• Remains flexible between -5°c to 70°c
• Easy to use fibre-free sealant
• This Fire Board standard 50mm thickness gives 4 hours fire and smoke barrier and up to 2 hours insulation
• Life expectancy of over 25 years
• Suitable for large openings in walls and floors with additional supports
• Contributes to Green Building.
• Use in conjunction with CPS06 Trowel Grade and CPS07 Spray/Brush Grade Ablative Mastics

FSi Pyrocoustic Sealant is an acrylic based sealant used to reinstate the fire resistance performance of wall and floor constructions where they have been provided with apertures for the penetrations of multiple services, also to form linear gap seals where gaps are present within the wall and floor constructions and linear joints where wall and floor constructions abutt. Pyrocoustic Sealant has slight intumescent properties that cause it to swell upon heating.

Intended Use

• The specific elements of construction for the system Pyrocoustic Sealant are as follows:
• Fire resistance testing to EN 1366-3 EI 120, EN 1366-4 EI 240 and BS 476 300mins
• Fire resistance testing to ASTM-E 1966, UL 2079
• CAN/UL 115-11 – ULus & ULc Listed
• Resistance to Fire Classification EN 13501-2
• Reaction to Fire Classification EN 13501-1
• VOC Tested – ASTM D2369-10, LEED 2009-EQ041 SCAQMD
• Acoustic Isolation to EN 10140 to 48dB.
• Air Permeability testing to EN 1026 to 600Pa – 100Pa 0.0/0.0 m3/h/m2

Key Product Points

• Mechanical Adhesion, Tensile testing & Shore Hardness to ISO 9046:2005, ISO 8339:2005 & ISO 7619-1:2011
• Fire resistance tested in flexible walls, rigid walls and floors
• Tested in Linear Joints up to 50mm wide
• Tested in large service openings up to 490 x 150mm
• Tested with Metallic Pipes, Cables, Cable Bunches, Cable Trays and Cable Ladders
• Causes no known effects to plastic pipes, plastic cables, sheathing or metallic components
• For use in low movement joints, remains flexible
• Halogen free, resists fungi and vermin
• Shelf Life 18 months