QuelStop Fire Batt 1200mm x 600mm x 50mm

The QuelStop Fire Batt is a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services.

Can be used in conjunction with other Quelfire products such as:

• Pipe Collars
• QuelCoil Intuwrap
• HPE Graphite Intumescent Sealant
• Intumescent Acoustic Acrylic Sealant
• QF2 Fire Protection Compound

Application:

• Suitable for use in flexible walls, rigid walls and floors
• Suitable for use around cables, cable bunches, cable trays, cable ladders and non-combustible pipes
• Can be used as a blank seal as a head of wall detail
• Can be installed into both lined and unlined apertures in partition walls
• Can be installed as a single or double batt seal
• Can be pattress fitted / face fixed to walls
• Tested with plasterboard ceilings and steel composite profile decks

Testing

• Fire resistance testing to BS EN 1366-3:2009
• Up to 2 hour fire rating
• Classified to EN 13501-2: 2007 A1:2009
• Acoustic tested to EN 10140 to 60 dB
• CE Marked

QuelStop Fire Batt is manufactured from stone wool insulation which consists of small fibres. Appropriate protective clothing, including gloves, dust mask, safety glasses, should be worn especially during cutting and installation, to guard against dust inhalation, eye and skin irritation.