Eclipse Interdens Universal DIN Lock Intumescent Kit - 1mm Body, 2mm Strike & Forend

This bespoke intumescent kit provides crucial fire protection for timber fire doors fitted with Eclipse DIN locks. By expanding upon exposure to heat, it securely seals the voids created during the rebating process to prevent heat transfer and maintain the door's structural integrity.

• Accelerate your fit-out: The semi-rigid material features a self-adhesive backing, allowing for rapid, peel-and-stick application straight out of the packaging.
• Eliminate compliance risks: Fully third-party accredited by IFC, ensuring your installation meets strict building control requirements without question.
• Ensure superior fire sealing: The monoammonium phosphate compound activates at 150°C, expanding up to 95 times its original volume to block fire and heat.

Tested extensively by leading hardware manufacturers, this intumescent kit meets the rigorous demands of BS 476: Part 22: 1987 and BS EN 1634-1: 2014. It is fully backed by IFC Certification (IFCC 1687), validating its performance for 30 and 60-minute timber fire door applications. Always ensure your chosen lock's test evidence is compatible with monoammonium phosphate intumescent before installation.

Specifications:

• Product Type: Intumescent hardware protection kit
• Compatibility: Universal fit for Eclipse and Frisco DIN locks
• Material Thickness: 1.0mm (Lock Body) / 2.0mm (Strike & Forend)
• Material Base: Monoammonium Phosphate-based (bonded to mineral fibre)
• Activation Temperature: 150°C (with secondary surge at 300°C)
• Expansion Ratio: 25x to 95x volume
• Fire Rating: 30 and 60 minutes (timber applications)
• Certification: IFC Certified (IFCC 1687), BS 476-22, BS EN 1634-1
• Fixing: Self-adhesive backing

Intumescent kits must be used in conjunction with the appropriately fire-tested lockcase, hinges, and automatic door closers to achieve a fully compliant fire doorset.