Trend Contractor Lock Jig A

A contractor jig with interchangeable templates for use with a plunger router to cut the mortise & face-plate recess for popular door locks.

Suitable for most common sashlocks & deadlocks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.

Features

• Deeper mortises can be achieved with a suitable size of auger bit
• Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood
• Steel plates & body for maximum strength, durability and accuracy
• The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter
• A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise
• Thumb-turn quick release clamps
• Complete with 17 interchangeable templates to fit all common lock cases (5 templates) and face plates (12 templates)
• Centering insert ensures perfect position on any door
• Guid bush collar converts the GB160 to a 30mm guide bush
• Reference chart provided for quick reference