173 items
Filter
Filter
Bulk Buy
Certifire Approved
FD30
LP1504FO/BR/LIGHT-75
Lorient Fire Only Seal 15x4mm Light Brown (Pack of 75)
Back in stock soonBulk Buy
Certifire Approved
FD30
LP1004SS/BK-50
Lorient SS Fire & Smoke Seal 10x4mm Black (Pack of 50)
£150.22 Inc. VAT£125.18 Exc. VAT
6 in stock Certifire Approved
FD30
LP1504/FIN/BLK
Lorient Finesse Fire & Smoke Intumescent Strip 15x4mm Black
£7.79 Inc. VAT£6.49 Exc. VAT
394 in stock Bulk Buy
Certifire Approved
FD60
LP2004FO/WHITE-50
Lorient Fire Only seal 20x4mm White (Pack of 50)
£206.66 Inc. VAT£172.22 Exc. VAT
4 in stock Bulk Buy
Certifire Approved
FD30
FO1504/GY - Bulk Pack 75
Pyroplex Fire Only Intumescent Strip, 15mm x 4mm x 2.1m, Grey (Pack of 75)
£117.50 Inc. VAT£97.92 Exc. VAT
6 in stock Bulk Buy
Certifire Approved
FD60
FO2004/BK - Bulk Pack 70
Pyroplex Fire Only Intumescent Strip, 20mm x 4mm x 2.1m, Black (Pack of 70)
£148.10 Inc. VAT£123.42 Exc. VAT
6 in stock Bulk Buy
Certifire Approved
FD60
FO2004/BR - Bulk Pack 70
Pyroplex Fire Only Intumescent Strip, 20mm x 4mm x 2.1m, Brown (Pack of 70)
£168.84 Inc. VAT£140.70 Exc. VAT
8 in stock Certifire Approved
IS1007/WH
Lorient LAS1007 Single Batwing Seal - 14mm - White
£8.14 Inc. VAT£6.78 Exc. VAT
226 in stock Our Brands
Choosing the right fire door strip
Every certified fire door relies on a perimeter sealing system to perform as tested. The door leaf itself can hold back fire for 30 or 60 minutes, but without the correct strip fitted into the edge of the door or frame, hot gases, flame and smoke would escape through the perimeter gap long before the door leaf failed. Specifying the right product — and fitting it correctly — is what turns a fire door blank into a compliant FD30, FD30s, FD60 or FD60s assembly.
Intumescent strips, smoke seals and combined seals
There are three broad categories of fire door strip, and the right choice depends on the door's classification:
- Intumescent strips expand rapidly when exposed to heat, sealing the gap between door and frame to prevent flame and hot gas spread. Used on FD30 and FD60 doors where smoke control is not required.
- Smoke seals use a brush, fin or pile to block cold smoke at ambient temperatures, before any intumescent has had a chance to activate. They can be fitted alongside a fire-only strip or as a standalone product for draught and acoustic control.
- Combined fire and smoke seals integrate both functions in a single product — an intumescent core with a brush or fin attached — and are required for doors designated FD30s or FD60s (the "s" denotes smoke).
Read MoreRead Less
Subscribe to our newsletter
Subscribe now to receive the latest fire safety news, promotions & product releases straight to your inbox.
