You have no items in your shopping cart.
  • Huge StockHuge Stock 1000s of Products Always in Stock
  • Late OrdersLate Orders? Order Up Till 4pm for Next Day Delivery
  • Dedicated SupportDedicated Support We Have A Team of Experts to Assist You
  • Flexible DeliveriesFlexible Delivery Need A Special Delivery Arrangement?

More Views

  • -ES/SDS-05
  • -ES/SDS-05
  • -ES/SDS-05
  • -ES/SDS-05
  • -ES/SDS-05
  • -ES/SDS-05

Surface Mounted Intumescent Strip - 60 minute fire rated

Quick Overview

Surface Mounted Intumescent Strip - The easy way to fit Fire & Smoke Seals to your door!

A surface mounted intumescent fire seal or fire/smoke seal available in white or brown from stock. No routing is necessary.  Surface Mounted Intumescent Strip is supplied with intumescent paper for use around lock and hinge areas and two labels printed “Fire Door – Keep Shut”.


  • Sold as a single doorpack consisting of 5 x 1050mm lengths
  • 3 lengths 2.4mm thick - for top and lock side of door
  • 2 lengths 1.0mm thick - for hinge side of door
  • No rebating or routing necessary
  • Saves on labour
  • Can be fitted directly over hinges
  • Independently tested to BS476 Part 22 (1987)
  • Up to 60 minutes integrity
Product Code: ES/SDS

Availability: In stock

Excl. VAT: £24.50 Incl. VAT: £29.40
  • Buy 5 for £24.00 (£28.80 incl. tax) each and save 2.0%

* Required Fields

Excl. VAT: £24.50 Incl. VAT: £29.40



This is a surface-mounted intumescent fire or fire and smoke seal available in black, brown, red, white, and real wood veneer finishes. No routing is necessary. Supplied as a pack with intumescent paper for use around lock and hinge areas and two labels printed “Fire Door – Keep Shut”.

Fixing requirements

Ensure that a minimum 3mm - 3½mm gap exists between door and frame, down the closing stile and across the head. Only a 1mm gap is required down the back edge as the standard strip is only 1mm thick and covers hinges without binding.

Important Note

Existing painted or varnished door frames must be cleaned thoroughly with white spirit or detergent water and completely dry before application of seals. For new woodwork the surface must be sealed with sealant/paint before seal application


Peel off backing paper from the self-adhesive fixing strip starting on the brush side and, with the smoke seal touching the door stop, press the intumescent seal into position. The seal can be easily cut with a sharp knife to fit around lock areas. Two 1100mm lengths are supplied for fitting down the closing stile and these are 2.4mm thick. One 1000mm long x 2.4mm thick strip is supplied for the head of the door frame. Two 1100mm long strips (1mm thick in standard version and 2.3mm thick in plastic version) are supplied for the back of the door frame, and these adhere from top to bottom, over the hinges (this helps to keep the hinges and screws cool in a fire). Intumescent paper is supplied for application around a rebated lock, to keep the lock cool in a fire. Remove lock from door, cut the intumescent paper to size, wrap it around lock and sandwich it between the lock and door as you replace the lock. Also place paper under the keep plate. Labels are supplied for single or double doors, printed “Fire Door – Keep Shut”.

These seals comply with BS476 Part 22.

The intumescent seals can be painted or varnished over but the brush must not be painted.

Note: panel pins are supplied to secure through the brush smoke seal at each end and every 300mm apart along its length. These panel pins must be fitted as requested by building control officers and fire officers.

You may also be interested in the following product(s)

Product Reviews